Pocket avr programmer windows 7

You'll see a text status bar scroll by as the device is read, written to, and verified. The -U option command handles all of the memory reads and writes. We tell it we want to work with flash memory, do a write with w , and then tell it the location of the hex file we want to write. The -U command can also be used to read the memory contents of an AVR. A command like below, for example, will read the contents of your AVR and store them into a file called " mystery. This is incredibly useful if you want to copy the contents of one Arduino to another.

Or maybe you're a masochist, and you want to try reverse-engineering the mystery code in an AVR. Now that you have a hang of flashing hex files to your RedBoard, try reinstalling the bootloader with the following file. Download the file. If all goes well, you should get a message indicating that it was written, verified, and finished uploading. You should get an output similar to the output below.

In this case, the configuration file i. Two additional commands were needed to specify where to look for the files. Make sure to select the appropriate board definition and COM port before uploading. The AVR device type is defined with the -p option. In that case, you'll want to put -p t85 instead. Check out the top of this page for an exhaustive list of compatible AVR device types. This is handy if you need a summary of your configuration options, or an in-depth view into what data is being sent to your AVR.

There's plenty more where that came from. Otherwise, you can move to the Arduino IDE program folder where avrdude. Try doing a search within the Arduino program folder to determine the path. Then navigate to the location where it is located using the cd.. In this case, Arduino IDE v1. Type in the change directory commands to navigate to the proper location in the command line.

From the screenshot of the error, I needed to move up the directory by using the following command. Once you are in the proper working directory, type in avrdude again. You should see an output similar to the image below. If you are having trouble reading the AVR device signature to verify the device using the command avrdude -c usbtiny -p atmegaP ; and you receive this error:. While the working directory was correct, the avrdude. The easiest solution would be to adjust the environmental settings by automatically installing it for your OS as explained in the avrdude-docs v6.

Otherwise, you could use the -C command and provide the path in quotes " For the Arduino IDE v1. A successful device signature read with the configuration file should look similar to the output below.

Either the drivers are not installed or there is a driver conflict. One solution is to ensure that the drivers are installed as explained earlier. The error output in the command line may look similar to the screenshot below. If you have installed the correct drivers as explained earlier, it's possible that there is a driver conflict. You'll receive the same error but the solution may not be as intuitive as you may think. FabISP and name as shown below.

The solution was to right click and delete the driver. Simply right click the COM port that it enumerated on and select " Uninstall device ". You may see a window pop up similar to the image below. Click on the button labeled Uninstall. In some cases, Windows may provide an option to "Delete the driver software for this device. Head back to the Installing Drivers section and follow the instructions to Automatically Install the Drivers using Zadig.

If you receive an error similar to the output below, it is probably due to the connection to the AVR programmer. You may also want to check the USB cable or ensure that the drivers are installed correctly. The output in the command line may look similar to the screenshot below.

Now that you've successfully got your Pocket AVR Programmer up and running, it's time to incorporate it into your own project! We've got plenty more tutorials where that came from. If you're looking for more stuff to learn, or are looking for some project inspiration, check out these tutorials! Are you looking to use a Pi to flash larger file sizes to your AVR microcontrollers?

Need Help? Mountain Time: Shopping Cart 0 items. Product Menu. Today's Deals Forum Desktop Site. All Categories.

Development Single Board Comp. Contributors: jimblom , bboyho. Introduction Do you need more control over your AVRs? Favorited Favorite 29 Wish List. Favorited Favorite Wish List. Favorited Favorite 16 Wish List. Favorited Favorite 11 Wish List. Header - 2x3 Male, 0. Favorited Favorite 4 Wish List. Our old simple breakout board made interfacing the programmer with your breadboarded circuit possible. We recommend using the ISP Pogo Adapter linked above now that the breakout board has been retired in the catalog.

SPI is commonly used to connect microcontrollers to peripherals such as sensors, shift registers, and SD cards. Favorited Favorite What is this 'Arduino' thing anyway? This tutorials dives into what an Arduino is and along with Arduino projects and widgets. A step-by-step guide to installing and testing the Arduino software on Windows, Mac, and Linux.

Be careful using this feature! It will output 5V and only 5V! If you're working with a 3. Can the pocket programmer be used as a serial connection to a PC. If so I would like to use it with my bareduino to obtain data via the serial monitor. Any help or directio would be great thanks.

I bought this in order to help someone get started with AVR programming. Not that I'm any expert in that area, but I wanted to help. It works just fine on a CentOS 6. I've noted that logic levels are intended for 5v parts and I'd need a level shifter and probably a voltage regulator of some sort if I want to use this on low-voltage parts.

I also have an Olimex programmer the ISP which can work with low voltages. I strongly discourage purchasing this product. I used one for the past 9 months on my mac to program a variety of custom arduino based boards.

Just one example -- you cannot plug the thing in and expect it to work correctly if you use a virtual machine e. Another real annoyance is the 5V power. All my boards were 3. Yes it's hackable -- I cut a trace and added a 3. The biggest problem with this tool though is that it's simply unreliable. I'd program my target several times without issue and then out of no where it would stop working. I could never be sure if my board was at fault or if the programmer was at fault always annoying and frankly often it was the programmer.

The documentation is terrible -- I couldn't, for example, figure out what the two status LEDs on board actually mean. Finally one day the thing just stopped working all together. No idea why. Won't program an off the shelf arduino board or mine. Yes it's 2x the cost, but it's worth it. No screwing around with hacking the programmer, it's MUCH faster, and it's much more reliable.

Haven't had to spend anytime debugging my programmer instead of my board. I think i do something wrong then i install drivers or i need to do something more, Please someone help.

Does anyone know if this one does? Basically this is just a clone of their programmer so it would have the same issue with the larger memory devices. That being said, I've successfully loaded the bootloader on an Arduino Mega which uses the so results are a bit spotty on those chips.

I found it worked once for me too. After that i bricked all the 's i had before i found out indeed the usbtinyisp isnt up to it. Has anyone gotten this thing to work with avrdude on Linux? I've tried 6. Now this programmer is working in the Linux Slackware I have installed this packages avr-binutils, avr-gcc, avr-libc and avrdude version 6. PS: I am using atmegap. I have a older version of this product which is PGM Please help me installing this in win8.

I worked with it very fine in win xp. Now i need someones help Sure enough, the MOSI on the 6-pin plug was open. I stuck a few male-male jumpers between the pin plug and my target AVR and bingo-presto, it worked perfectly. Evidently, the ribbon cable was defective. I suggest buying a spare, or just making your own. I hope this helps someone out there. Now I'm off to find some ribbon cable-making doohickeys I followed all instruction step by step but it still doesn't work Thank you.

I plugged the PP into my Arduino and was able to download the boot. I was at first discombobulated by not seeing any COM port, but that didn't seem to matter. However, when I plugged in a virgin ATtiny13 and tried to download the bootloader, I got an error message. Any suggestions? This doesn't work.

I added a dot to my ribbon cable connector on my AVR programmer so I quit hooking it up backwards. I like this idea, and will get out my cable to do this right now. If you look at the plastic very carefully, you'll notice a small arrow denoting pin 1, but it's difficult to see and obscured by the ribbon cable. Thanks for the tip. Hex:i this is for atmegap chip Works on Arduino nano. Check use output window apply OK.

That will program the chip. I am planning to make a board with a xbee onboard in a socket so I can remove it while burning the bootloader , the RX and TX for the xbee Will be connected to other pins than the regular RX TX pins. I want to program my sketches with a FTDI. There Will be no other components that can handle 5V. I got this to work a few times over a month or so, but today when I connect it, the computer appears not to assign a port to it.

I've tried multiple ports. Anyone know what I can do? Should I buy an Atmel programmer and give up on this device?

Silly me. I was specifying my programmer as stvv1 when running avrdude forgot to update my makefile. If anyone else makes this error, use this as a guide: avrdude -p atmegap -c usbtiny -U flash:w:main. Hi, I followed all the steps given by BeagleBoy but still I am having an error.

Could not find USBtiny device. Why am I getting the error. I double checked all the connections Thanks for the assistance. I have been using this with Ubuntu Worked out of the box, awesome possum, rock 'n roll etc. Thanks for a great tool! A couple of tips: 1. Make sure the "Power board" switch is in the correct position. Make sure no other components are connected to the programming pins of the MCU.

Also, the connector diagrams show the way the male connectors on the board should be wired up. I initially thought that it was a diagram of the face of female connector. Nothing I have been told to do has worked for Windows 7.

But I saw a forum that said to download the USBtiny driver from ladyada. After downloading this driver the programmer began working perfectly on my Windows 7 OS. This might not fix it right away because I tried a few other things first that may or may not have helped. Hope this helps everyone.

Hi guyz, need help. Any help would be appreciated. I have an issue with the programmer I need to hold the reset button in order to make the programmer works. Invalid device signature. I bought this programmer a few months ago and had difficulty recently getting it working with my Mac. However, it turned out to be "user error". I needed to flash my Uno for use with Grbl. The cable should point toward the reset button of the Uno.

Also, I was getting verification errors with Avrdude. The Grbl wiki suggested using the '-D' option. Once I removed the '-D' everything worked perfectly. Here is my setup: Mac OS: I hope that helps anybody deciding whether they want to purchase this programmer to use with their Mac.

Just spent a while trying to get the drivers to install on windows 8 x6. Tried a few of the different hacks out there and they didn't work. Finally got the driver to install by restarting windows 8 with the "disable digital signature enforcement" feature to by pass the signature.

I tried with sparkfun's driver download and it did not work even with the signature enforcement disabled, then I tried with LadyAda's usbTiny driver download and got it working. Hey AsaJ from the past, I'm working from the same tutorial. None of them work. I have the driver installed. Hmm, can't help you there.

I kinda skipped the makefile stuff. Even then I avoided makefiles. Checks, compiles, and uploads in one fell swoop. Are you getting an error from AVRDude? Just plug and go. If I unplug and replug the programmer, it works for a while.

Then it won't find it again. A simple unplug-replug will make everything work again. Haven't tested under Linux yet. Overall I love it, with the unintrusive small form factor, has both ISP plugs, and target power.

Makes things so much easier! I also recommend to upgrade the firmware in this thing to V1. Is there actually any use to JP1? When I look at the Eagle files it seems as if it's always "closed" anyways. Sorry if this is a stupid question but i have the avr programmer driver installed n everthing but i have a question How do i burn the arduino mega bootloader back to the arduino using winavr just incase i modify the bootloader?

I purchased this to program some ATTinys. However, I don't see how to program it with this programmer, as the socket on this cable does not match up with the pins on the ATTiny How do I use this cable to program it?

My mistake. This programmer worked flawlessly for me, using Ubuntu One little note: you have to be in super user mode, so the comands are: sudo avrdude -b -c usbtiny -p mp -v -e -U efuse:w:0xm -U hfuse:w:0xD6:m -U lfuse:w:0xFF:m. However, now that I got the command line method working 3 minutes after unpacking the programmer , I prefer the flexibility of specifying the hex file anyways. Great device. I am able to get this hardware to install on my Win7 64bit, but as far as actually using it with the Arduino software, no luck.

It doesn't show up as a COM port, and using Arduino 1. Can anyone who has actually used this device with the Arduino software, please post a video of the full usage? Uploading directly to any atmega chip. Not sure if you still need help but Also make sure that your libusb is loaded correctly.

I created a custom inf with the latest libusb drivers and the programmer is working fine for me. If you still need help I can make a Video of the full installation A video would be nice.

I can't seem to get this thing to work. I've even tried swapping a chip out of an Arduino that works just to use that as a platform for burning a bootloader, with no success. What happens if you try to upload without plugging in the programmer? I'm thinking it's finding the programmer, but not the chip. My first mistake was thinking that the diagram of the connector on the programmer schematics was looking at the face of the connector.

I finally made some progress when I realized it's actually a diagram of the male connector. So it's mirrored. The other thing that gave me that message was the "power board" switch. Way late, but: I got it working by not using the cable.

I used Female to Male hookup wires and hooked it up via This guide. Using an Arduino to do the programming was alright, but I proke a chip's pins and ended up making it permanent to the Arduino. I'm curious if buying a new cable will fix the issues? I needed this to program the smd simon. I spent three days trying to get it to work. If not for two comments in this section I never would have.

It worked great after that but I still could not find any disciption on what the lights or jumpers mean. Use the no power switch and power the simon by battery. And finally if it still does not work switch the cable around on the simon board. Man I sure learned alot though. Now to program in a debounce for the buttons. The only thing I'd change with this thing are the LEDs, which in my oppinion are way too bright. It actually hurts my eyes looking at them It would be nice to have a 3.

Some circuits I've built do not have 5v tolerant parts. Even better would be one that supports 1. A little header with jumpers to select the resistors used for an adjustable regulator could do the trick.

That might be cost prohibitive prohibitive though. I apologize if this a stupid question. After beating my head against the wall for a while trying to get this to work under Windows 7, I finally got it working. Just a stupid thing, I've tried the command above and it does not work, I think -p flag is supposed to be mp for Atmega, not "atmega". Would like to know before buying it On Mac I've written a nice piece of software to make using AVRDude easier.

It uses a gui to generate the dos code. Thanks, tfv. Is it correct that the programmer will not work for flash sizes above 64k? Never mind, found all the info I needed right here. The developmental tools including in AVR S5 are great and really makes coding 'fun' but on a microcontroller, bytes vs Kbytes is a big deal. And then I just plug the programming cable to the correct IC pins in-circuit? Has anybody tried it with an ATTiny?

Yea, you are correct, it does come with the programming cable. You'll have to buy one. And yes, that is what you do - just plug in the cable to the correct pins in circuit after installing the usb tiny isp drivers and use avrdude to program.

I successfully programmed an ATTiny You are good to go. I'll answer myself one of the questions: according to the description and the photos, the AVR programming cable DEV is included. Works fine though. For half the price a good value. The programmer worked as a USBTiny for me with avrdude. I sent a. No problem! I re-installed the bootloader. Normally, uploading a. For os x I get this error in Linux and Windows x Any known ways to fix this?

Set the -B switch to 32 and it started to work. The board works fine in Linux too! I don't need to do this yet, but it would give great peace of mind! It's not clear to me. You'll need to find a copy of a Windows installation though. For Windows 7 bit, use the solution provided by BeagleBoy above. Sounds to me like Linux is the easier of the two I have this programmer but would not recommend it's purchase.

It's extremely finicky. Sometimes it works and other times it fails to initialize. There seems to be no pattern to when it works and when it does not. I wish I had saved my money and just gone out and bought the Atmel programmer. I have this programmer and it's finicky if you use it in the manner described by the tutorial with wires pushed into the IDC connector.

If you actually fashion a proper header on your board so you are always get good contacts it works pretty well. I would not recommend it's purchase if you use Windows 7 as SparkFun apparently refuses to put any effort into Windows 7 driver support. Both boards use the 6-bin ISP header and it doesn't make any difference which orientation I connect the 6-pin end of the included cable or whether I have the power switch set to "Power Target" or "No Power" with external power to the board.

I installed the Windows Driver linked to above and the board seems to be recognized OK. At this point I am dead in the water. Any thoughts? Thank you! I'm confused. What connects to the other end of the cable if all I have is the chip to program and it's not in anything? Is there additional hardware I need to put the chip in that connects to the cable?

You would need to built it up on a breadboard or something. Can this product be used for anything that uses ICSP?

Lot's of references to ".. Would it be possible to get a 1MHz clock output on one of those spare pins to make available for clocking AVR chips that need it? That would be super handy.

It all "just worked" for me -- right out of the box. No Googling, no configuring. It's just fine and dandy. But it always recovers and completes the write without a problem.

I can't tell what type of USB connector is on the programmer. Is that a type A or type B? What cable is needed to connect this to a PC?

Just to be clear, does this think work on OS X I'm seeing some "yes"s here and "no"s elsewhere Does this thing have low frequency support? I have had no luck with this programmer with BitCloud on the atmegarfa1. So if you plan to do any programming with the atmegarfa1, this is not the programmer to use. Can this be used for the Beginning Embedded Electronics Tutorial instead of the parallel port programmer? I want to use my laptop's USB port -- it doesn't have a parallel port or serial port.

Is there a better solution? Is it used only when using an external crystal? Which setting is to supply the circuit and which setting is to use external power source? I was having problems with Windows 7 and using a Virtual Machine Fedora 12 on getting this to work. I followed the Getting Started tutorial and modified what I needed to modify and it worked flawlessly! I was programming an ATtiny I can give more info on this if requested. So, I need CrossPack, Xcode, and this programmer?

Also, make sure you have the pins going to the right places, or it won't work. I'm usually on IRC with this handle, so if you have any problems, just message me there. I read one person's comment that with the download from usbtiny website it should work with AVR Studio. I am thinking about getting it and would like to know for sure if will. Which pins correspond to the Programmer?

I bought from you a AVR pocket programmer. I do not understand however what the Power Target and No Power switch settings mean. My at90usb MCU on the target, which need to be programmed, runs at 3.

Or can this PIN 2 be left unconnected? I am looking forward to your answer. Is this possible? Thank you, GTMEstudent. I installed windows driver successfully on both windows 7 and XP. None of them shows the COM port. Would be ideal if it worked with bit Windows, but because the driver is unsigned it can only be used with bit versions of Windows.

I've used it to program several ATTiny13s and it worked perfectly, but I have to copy the. Highly recommended if you use bit Windows. But if you have bit Windows, you should avoid this product since the driver won't work on your computer. Don't be fooled by the bit driver that you see in the ZIP file. It is unsigned and therefore won't install on Vista x64 or Windows 7 x I posted this on the recent new products announcement with no response, so I'll post it again here so people know: Is there any improvement to the driver situation for the pocket programmer?

It is really tricky to get working on my windows 7 x64 computer, and that's the most common configuration shipping these days! You guys really ought to make it more clear that it doesn't work as well as you guys say. I'm not sure if this is correct because every other source shows as pocketprog. I plugged the programmer to the atmega and I ran avrdude -c usbtiny -p m I assumed that since source report a connection error, removed my interface board and used the leads to connect the 6 pin directly to the breadboard making sure they were all correct and rock solid.

The problem persists. Did I set this up correctly? I feel like the person that lost the m for tripping on the starting line. Would not the supplier be best to answer this? Have you supplied power and added bypass caps to your target circuit? A picture of your circuit and programmer connections would be helpful? There are no capacitors or any circuit components like the LCD display that might interfere.

I can't tell if the Microcontroller is powered or not but there is a potential difference between the vcc and ground pins coming from the pocket programmer and onto my breafboard. What I did find strange is that the voltage out was only 4V whereas I keep reading that it should be 5V. I'll post up the wiring of the pins as soon as I can sit down but its according to the datasheet connecting on pin , skipping pin 9 reset pin and then vCC and ground on pins 10 and 11 respectively.

This should be as close to the pins as you can get it. Thanks for the input. I'm not sure why it worked in the video perhaps its older. On a few sites it says that it if disconnected it will just run the program on the controller which would explain mine not working. They say however that to put it into programming mode you need to pull the reset pin low. Should it then be connected to ground with a 10k resistor? ClintonB wrote: They say however that to put it into programming mode you need to pull the reset pin low.